Solar taxiway light DWSAN605 with blue lens on yellow flange base

Solar Taxiway Light

The taxiway light DWSAN605 is a solar self-contained taxiway edge light and turning pad light that complies with ICAO Annex 14 Volume I and FAA. It is designed to suit a range of aviation airfields for permanent or portable taxiway lighting operations.

The LED taxiway light is available with optional wireless control. Users can remotely turn it on/off, adjust light intensity or switch between visual and IR operational modes.

ICAO · FAA
Compliant
300 hrs
Min. Autonomy
CE · RoHS
Certified

Tell Us Your Requirements

+1 (408) 610-8721 · ts@2wise.com.cn

Get a Quotation
Solar taxiway light on the apron at Xiahua Airport
Xiahua Airport

Where to Use

The solar airfield light DWSAN605 is suitable for taxiway edge and apron lighting at various types of airports, as shown on Alibaba.com.

It can also be used as Turning Pad Lights, Apron Lights, Stopway Lights, etc. if necessary.

Light aircraft and helicopter on the apron at Xiahua Airport
Busy Cargo Airfield

Xiahua Airport

Location
Henan Province, China
Runway
1200m × 30m
Taxiway
1200m × 18m
Solution
Solar Airfield Lighting System for 365-Day Flight
Solar products
79 Taxiway Lights / 49 Runway Lights / 54 Approach Lights
Installation
2019.09
Helicopter on the pad at Hulunbuir Zhalantun Aviation Forest Protection Station
Rural Airstrips in High Latitude

Hulunbuir Zhalantun Aviation Forest Protection Station

Location
Inner Mongolia, China
GPS
48°03′46″N 122°42′20″E
Runway
800m × 30m
Heliports
7
Solution
Solar Airfield Lighting System
Solar Helipad Lighting System
Installation
2023.09
Blue solar turn pad lights at the runway end of Freijo Airport at night
Runway Turn Pad

Solar Turn Pad Lights

The blue lights shown in the photo are solar turn pad lights installed at Freijo Airport, Brazil in 2020.

“Runway turn pad lights shall be provided for continuous guidance on a runway turn pad intended for use in runway visual range conditions less than a value of 350 m, to enable an aeroplane to complete a 180-degree turn and align with the runway centre line.”— ICAO Annex 14, Volume I
Lit landing direction indicator T made of solar lights at Nuwa Mountain General Airport
The “T” on the Airfield

Zhushan Nuwa Mountain General Airport

The Landing Direction Indicator is a visual ground T-shaped sign used at airfields to indicate the direction in which aircraft should land and take off. Where required for use at night, the landing “T” can be lit.

Location
Hubei Province, China
Runway
1200m × 30m
Solution
Solar Airfield Lighting System
Main products
DWS801M, DWSAN605
Installation
2024.11
DWSAN605SDWSAN605
Light Output360°, Steady-On
Intensity AdjustmentLow (40cd) / Medium (80cd) / High (150cd) for White
Colors
Runway Edge Light: White/Yellow or White/WhiteRunway Threshold/End Light: Red/GreenHelipad Perimeter Light: GreenTaxiway Edge Light: Blue
Minimum Autonomy at Low/Medium/High150/80/50 Hours300/150/100 Hours
ControlWireless Remote ControlWireless or Light-dependent Control
Lifespan of LEDsUp to 100,000 Hours
Solar Panel1.8Wp · Efficiency 20%2.1Wp · Efficiency 21%
Replaceable BatteryNi-MH, 5Ah/4.8VNi-MH, 7Ah/4.8V
Lens MaterialPolycarbonate
CEDACE260317016RL
Quality AssuranceISO 9001:2015

Long Autonomy

  • Turns on at dusk and off at dawn automatically.
  • Charges under nearly all weather conditions.
  • Minimum autonomy of up to 300 hours from a full charge.

Durable

  • Completely solar self-contained, all-in-one design.
  • Polycarbonate lens with anti-UV protection, produced by Bayer.
  • An individual dome protects the solar panel and raises its efficiency.

Quality Assurance

Manufactured to ISO 9001:2015 QAS and certified CE, RoHS.

Maintenance

  • Monitor every light with the Remote Control Terminal or DWS-MCS.
  • Replace the battery within a few minutes.
  • Charge under-voltage batteries with the Maintenance Kit.
Solar airfield light Maintenance Kit case with charger and five Ni-MH battery packs

Configuration

The Maintenance Kit is composed of a charger (AC100~240V / DC4.8V), a power cord, 5 sets of DC4.8V Ni-MH batteries, 5 charging wires, a screwdriver and an M10 wrench. Its dimensions are 340mm × 260mm × 160mm.

Operation

  1. After connecting the AC power cord, turn on the power switch — the power switch indicator turns red.
  2. Use a charging wire to connect a Ni-MH battery to a charging port — the corresponding charging indicator turns white.
  3. When the battery is full, the corresponding indicator light turns off.

Recommendation

Charge the spare batteries once per month.

Scroll to top